Products and Services

BITUMEN

DESCRIPTION

Paving Bitumen (Straight Grade)- shall be prepared by the distillation of suitable crude,petroleum oil without subsequent blending with other grades. The material shall be homogenous and shall not foam when heated to 175°C. No mineral matter other than naturally contained in the materialshall be present


RECOMMENDED USE

Paving Bitumen specification covers physical and chemical requirement for use in Roads,Airfields and allied construction. Also some of the grades may be used for Industrial purpose.

SPECIFICATION OF PAVING BITUMEN

Sr.No. TEST PARAMETERS VG-10 VG-30 VG-40 BIT 10/20
1. Absolute viscosity at 60°C, poises, Min. 800 2400 3200 --
2. Kinematic viscosity at 135 °C, cSt, Min. 250 350 400 ---
3. Flash point cleave land open cup, °C, Min. 220 °C 220 °C 220 °C ---
4. Penetration at 25 °C,100 gm5 sec, 1/10 mm 80 - 100 50 - 70 40 - 60 15 ± 5
5. Softening point (R&B), °C.,Min 40 °C 47 °C 50 °C 65 ± 10
6. Matter soluble in Trichloroethylene, % by mass, Min. 99 99 99 95%
7. Thin Film Oven Test, on Residue
  1. Viscosity ratio at 60° C ,Max.
   4.0   4.0   4.0  
8. Ductility at 25° C, cm, after TFOT Min. 75 40 25 --
9. Loss on heating, oven test % by mass, Max. - - - 2.0
10. Ash, % by mass , Max. - - - 1.0

USES

Construction and maintenance of Roadways, Saturant for roofing felt, electrical cables for manufacturing Bitumen Emulsions etc.

Brij Chemicals

At Brij Chemicals, we manufacture the bitumen emulsions as per the requirement of our client that vary according to the application of bitumen and the climatic conditions.

We manufacture both anionic and cationic bitumen emulsions.

Our Products

Useful Links

Contact Us

Brij Chemicals
7 - B, Harinagar Society,
Nr. GEB Substation, Op. Anand Vidhya Vihar School
Gotri Road,
Vadodara (Gujarat)
Tel Fax : 0265 – 2345454 , 2345445
(J) 098250 45454 (S) 09825 327438 (B) 090994 45454

2015 Brij Chemicals© All Rights Reserved.

 Designed and Developed by TechnoViewer